VTF-2 MK 2 Subwoofer
|
![]() |
"A performance benchmark" |
|
If history is any guide, your system will sound remarkably better with the VTF-2. Usually, the reactions are the same. Those new to subwoofers exclaim that the VTF-2 has reawakened their music collection with new layers of sound. Owners of lesser subwoofers remark that their featureless boom is replaced with tight, enjoyable notes and textures. Experienced listeners are surprised by the VTF-2's impressive bang for the buck. You would think we would get used to the compliments, but we always appreciate them.
Studio-quality bass has traditionally been out of reach for the masses. Try this star performer that changes that.
Harnessing the unique Variable Tuning Frequency port technology (VTF), each port uses the air generated from the long throw woofer to dramatically boost the deeper frequencies. With both ports open, the VTF-2 doesn't seem small anymore. Both ports are large, with enormous flares to virtually eliminate port noise and distortion. This kind of port design is extremely tricky to engineer, and the VTF-2 succeeds down to a very deep 25 Hz with one port open (in maximum extension mode).
The reason for variable tuning is that all subwoofer designs, especially consumer-level subwoofers, involve tradeoffs in design. You cannot have a small subwoofer that goes very low, plays very loud and costs very little. Traditionally, the engineer decides what tradeoff he or she thinks is best for the consumer. The consumer has to take it or leave it.
The VTF-2 changes all that. It allows you, the user, to choose the tradeoff. If you enjoy music that is loud but does not have much deep bass, set the VTF series for maximum output. That way, you get maximum dynamic range with the lowest distortion. If you like music with deep bass, set it for maximum bass extension to reproduce the deep bass accurately. You can even switch between the two modes depending on what you play. That means effectively you get a subwoofer that can play loudly, and can play low, all in one, at a reasonable price!
Amp Peak/Short-term Power |
1000 Watts |
Continuous Amp Power |
250 Watts |
Frequency Response (maxiumum extension mode) |
25 Hz |
Frequency Response (maxiumum output mode) |
32 Hz |
Woofer Size |
10 Inches |
Crossover |
Bypassable 24 dB/Oct, continuously variable 30 - 90 Hz low pass filter |
Phase |
0/180° |
Dimensions |
19.5"(height) x 14"(width) x 18"(depth) |
Outlet Power Requirement |
300 Watts,115V AC |
Magnetically shielded |
Yes |
Ship Weight |
56 Lbs |
Warranty |
7 Years on the woofer, 2 years on electronics |